dmesg - MSI AMD Radeon 3000 - AMD Phenom II X4 905e
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.4.0-31-generic (buildd@lgw01-16) (gcc version 5.3.1 20160413 (Ubuntu 5.3.1-14ubuntu2.1) ) #50-Ubuntu SMP Wed Jul 13 00:07:12 UTC 2016 (Ubuntu 4.4.0-31.50-generic 4.4.13)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
tseg: 0000000000
x86/fpu: Legacy x87 FPU detected.
x86/fpu: Using 'lazy' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable
BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000cfe8ffff] usable
BIOS-e820: [mem 0x00000000cfe90000-0x00000000cfe9dfff] ACPI data
BIOS-e820: [mem 0x00000000cfe9e000-0x00000000cfedffff] ACPI NVS
BIOS-e820: [mem 0x00000000cfee0000-0x00000000cfefffff] reserved
BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000021fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.6 present.
DMI: MSI MS-7641/860GM-P43(FX) (MS-7641) , BIOS V17.17 04/22/2015
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x220000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000C0000000 mask FFFFF0000000 write-back
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 0000000230000000 aka 8960M
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xcfe90 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000099000] 99000 size 24576
Using GB pages for direct mapping
BRK [0x02200000, 0x02200fff] PGTABLE
BRK [0x02201000, 0x02201fff] PGTABLE
BRK [0x02202000, 0x02202fff] PGTABLE
BRK [0x02203000, 0x02203fff] PGTABLE
RAMDISK: [mem 0x33b72000-0x35db0fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F8D10 000014 (v00 ACPIAM)
ACPI: RSDT 0x00000000CFE90000 000038 (v01 7641MS A7641100 20150422 MSFT 00000097)
ACPI: FACP 0x00000000CFE90200 000084 (v01 7641MS A7641100 20150422 MSFT 00000097)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20150930/tbfadt-654)
ACPI: DSDT 0x00000000CFE90660 009DF0 (v01 A7641 A7641100 00000100 INTL 20051117)
ACPI: FACS 0x00000000CFE9E000 000040
ACPI: APIC 0x00000000CFE90390 00010C (v01 7641MS A7641100 20150422 MSFT 00000097)
ACPI: MCFG 0x00000000CFE904A0 00003C (v01 7641MS OEMMCFG 20150422 MSFT 00000097)
ACPI: OEMB 0x00000000CFE9E040 000072 (v01 7641MS A7641100 20150422 MSFT 00000097)
ACPI: HPET 0x00000000CFE9A660 000038 (v01 7641MS OEMHPET 20150422 MSFT 00000097)
ACPI: Local APIC address 0xfee00000
Scanning NUMA topology in Northbridge 24
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000021fffffff]
NODE_DATA(0) allocated [mem 0x21fff9000-0x21fffdfff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000021fffffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009efff]
node 0: [mem 0x0000000000100000-0x00000000cfe8ffff]
node 0: [mem 0x0000000100000000-0x000000021fffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000021fffffff]
On node 0 totalpages: 2031150
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 13243 pages used for memmap
DMA32 zone: 847504 pages, LIFO batch:31
Normal zone: 18432 pages used for memmap
Normal zone: 1179648 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8300 base: 0xfed00000
smpboot: Allowing 24 CPUs, 20 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
PM: Registered nosave memory: [mem 0xcfe90000-0xcfe9dfff]
PM: Registered nosave memory: [mem 0xcfe9e000-0xcfedffff]
PM: Registered nosave memory: [mem 0xcfee0000-0xcfefffff]
PM: Registered nosave memory: [mem 0xcff00000-0xffdfffff]
PM: Registered nosave memory: [mem 0xffe00000-0xffffffff]
e820: [mem 0xcff00000-0xffdfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:24 nr_node_ids:1
PERCPU: Embedded 33 pages/cpu @ffff880217400000 s98008 r8192 d28968 u262144
pcpu-alloc: s98008 r8192 d28968 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
pcpu-alloc: [0] 16 17 18 19 20 21 22 23
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1999390
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
AGP: Checking aperture...
AGP: No AGP bridge found
AGP: Node 0: aperture [bus addr 0x00000000-0x01ffffff] (32MB)
AGP: Your BIOS doesn't leave an aperture memory hole
AGP: Please enable the IOMMU option in the BIOS setup
AGP: This costs you 64MB of RAM
AGP: Mapping aperture over RAM [mem 0xc4000000-0xc7ffffff] (65536KB)
PM: Registered nosave memory: [mem 0xc4000000-0xc7ffffff]
Memory: 7808984K/8124600K available (8393K kernel code, 1282K rwdata, 3940K rodata, 1480K init, 1292K bss, 315616K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=24, Nodes=1
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=24.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=24
NR_IRQS:16640 nr_irqs:616 16
spurious 8259A interrupt: IRQ7.
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 1500.010 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 3000.02 BogoMIPS (lpj=6000040)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150930
ACPI: 1 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
Initializing cgroup subsys io
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
Initializing cgroup subsys pids
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
LVT offset 0 assigned for vector 0xf9
process: using AMD E400 aware idle routine
Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
Freeing SMP alternatives memory: 28K (ffffffff820b4000 - ffffffff820bb000)
ftrace: allocating 31994 entries in 125 pages
smpboot: Max logical packages: 6
smpboot: APIC(0) Converting physical 0 to logical package 0
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD Phenom(tm) II X4 905e Processor (family: 0x10, model: 0x4, stepping: 0x3)
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
x86: Booting SMP configuration:
.... node #0, CPUs: #1
process: System has AMD C1E enabled
process: Switch to broadcast mode on CPU1
#2
process: Switch to broadcast mode on CPU2
#3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (12000.08 BogoMIPS)
process: Switch to broadcast mode on CPU3
process: Switch to broadcast mode on CPU0
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0xcfe9e000-0xcfedffff] (270336 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
pinctrl core: initialized pinctrl subsystem
RTC time: 0:58:58, date: 07/06/17
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
node 0 link 0: io port [1000, ffffff]
TOM: 00000000d0000000 aka 3328M
Fam 10h mmconf [mem 0xe0000000-0xefffffff]
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [d0000000, efffffff] ==> [d0000000, dfffffff]
node 0 link 0: mmio [f0000000, fe9fffff]
node 0 link 0: mmio [fea00000, febfffff]
node 0 link 0: mmio [fec00000, ffdfffff]
TOM2: 0000000230000000 aka 8960M
bus: [bus 00-1f] on node 0 link 0
bus: 00 [io 0x0000-0xffff]
bus: 00 [mem 0x000a0000-0x000bffff]
bus: 00 [mem 0xd0000000-0xdfffffff]
bus: 00 [mem 0xf0000000-0xffffffff]
bus: 00 [mem 0x230000000-0xfcffffffff]
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 4 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20150930/hwxface-580)
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
acpi PNP0A03:00: ignoring host bridge window [mem 0x000d0000-0x000dffff window] (conflicts with Adapter ROM [mem 0x000cf000-0x000d09ff])
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0xcff00000-0xdfffffff window]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [1022:9600] type 00 class 0x060000
pci 0000:00:01.0: [1022:9602] type 01 class 0x060400
pci 0000:00:05.0: [1022:9605] type 01 class 0x060400
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: System wakeup disabled by ACPI
pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
pci 0000:00:11.0: reg 0x10: [io 0xc000-0xc007]
pci 0000:00:11.0: reg 0x14: [io 0xb000-0xb003]
pci 0000:00:11.0: reg 0x18: [io 0xa000-0xa007]
pci 0000:00:11.0: reg 0x1c: [io 0x9000-0x9003]
pci 0000:00:11.0: reg 0x20: [io 0x8000-0x800f]
pci 0000:00:11.0: reg 0x24: [mem 0xfe9ffc00-0xfe9fffff]
pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:12.0: reg 0x10: [mem 0xfe9fe000-0xfe9fefff]
pci 0000:00:12.0: System wakeup disabled by ACPI
pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310
pci 0000:00:12.1: reg 0x10: [mem 0xfe9fd000-0xfe9fdfff]
pci 0000:00:12.1: System wakeup disabled by ACPI
pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:12.2: reg 0x10: [mem 0xfe9ff800-0xfe9ff8ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: System wakeup disabled by ACPI
pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:13.0: reg 0x10: [mem 0xfe9fc000-0xfe9fcfff]
pci 0000:00:13.0: System wakeup disabled by ACPI
pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310
pci 0000:00:13.1: reg 0x10: [mem 0xfe9f7000-0xfe9f7fff]
pci 0000:00:13.1: System wakeup disabled by ACPI
pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:13.2: reg 0x10: [mem 0xfe9ff400-0xfe9ff4ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: System wakeup disabled by ACPI
pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 0x20: [io 0xff00-0xff0f]
pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
pci 0000:00:14.2: reg 0x10: [mem 0xfe9f0000-0xfe9f3fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: System wakeup disabled by ACPI
pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
pci 0000:00:14.4: System wakeup disabled by ACPI
pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
pci 0000:00:14.5: reg 0x10: [mem 0xfe9f6000-0xfe9f6fff]
pci 0000:00:14.5: System wakeup disabled by ACPI
pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
pci 0000:01:05.0: [1002:9616] type 00 class 0x030000
pci 0000:01:05.0: reg 0x10: [mem 0xd0000000-0xdfffffff pref]
pci 0000:01:05.0: reg 0x14: [io 0xd000-0xd0ff]
pci 0000:01:05.0: reg 0x18: [mem 0xfebe0000-0xfebeffff]
pci 0000:01:05.0: reg 0x24: [mem 0xfea00000-0xfeafffff]
pci 0000:01:05.0: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:01.0: bridge window [mem 0xfea00000-0xfebfffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [io 0xe800-0xe8ff]
pci 0000:02:00.0: reg 0x18: [mem 0xfdfff000-0xfdffffff 64bit pref]
pci 0000:02:00.0: reg 0x20: [mem 0xfdff8000-0xfdffbfff 64bit pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:05.0: PCI bridge to [bus 02]
pci 0000:00:05.0: bridge window [io 0xe000-0xefff]
pci 0000:00:05.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xcff00000-0xdfffffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled.
vgaarb: setting as boot device: PCI:0000:01:05.0
vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:05.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
e820: reserve RAM buffer [mem 0xcfe90000-0xcfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:02: [dma 0 disabled]
pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:03: [dma 0 disabled]
pnp 00:03: Plug and Play ACPI device, IDs PNP0400 (active)
system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [io 0x04d0-0x04d1] has been reserved
system 00:05: [io 0x040b] has been reserved
system 00:05: [io 0x04d6] has been reserved
system 00:05: [io 0x0c00-0x0c01] has been reserved
system 00:05: [io 0x0c14] has been reserved
system 00:05: [io 0x0c50-0x0c51] has been reserved
system 00:05: [io 0x0c52] has been reserved
system 00:05: [io 0x0c6c] has been reserved
system 00:05: [io 0x0c6f] has been reserved
system 00:05: [io 0x0cd0-0x0cd1] has been reserved
system 00:05: [io 0x0cd2-0x0cd3] has been reserved
system 00:05: [io 0x0cd4-0x0cd5] has been reserved
system 00:05: [io 0x0cd6-0x0cd7] has been reserved
system 00:05: [io 0x0cd8-0x0cdf] has been reserved
system 00:05: [io 0x0800-0x089f] could not be reserved
system 00:05: [io 0x0b00-0x0b0f] has been reserved
system 00:05: [io 0x0b20-0x0b3f] has been reserved
system 00:05: [io 0x0900-0x090f] has been reserved
system 00:05: [io 0x0910-0x091f] has been reserved
system 00:05: [io 0xfe00-0xfefe] has been reserved
system 00:05: [mem 0xffb80000-0xffbfffff] has been reserved
system 00:05: [mem 0xfec10000-0xfec1001f] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [io 0x0e80-0x0f5f] has been reserved
system 00:06: [io 0x0ae0-0x0aef] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:08: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:08: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:08: [mem 0x00100000-0xcfefffff] could not be reserved
system 00:08: [mem 0xfec00000-0xffffffff] could not be reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 9 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:01.0: bridge window [mem 0xfea00000-0xfebfffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:05.0: PCI bridge to [bus 02]
pci 0000:00:05.0: bridge window [io 0xe000-0xefff]
pci 0000:00:05.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 03]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0xcff00000-0xdfffffff window]
pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfebfffff window]
pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfebfffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:03: resource 7 [mem 0xcff00000-0xdfffffff window]
pci_bus 0000:03: resource 8 [mem 0xf0000000-0xfebfffff window]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
pci 0000:01:05.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 35068K (ffff880033b72000 - ffff880035db1000)
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ c4000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
LVT offset 1 assigned for vector 0x400
IBS: LVT offset 1 assigned
perf: AMD IBS detected (0x0000001f)
Scanning for low memory corruption every 60 seconds
futex hash table entries: 8192 (order: 7, 524288 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1499302738.648:1): initialized
Initialise system trusted keyring
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.23)
Key type big_key registered
Allocating IMA MOK and blacklist keyrings.
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1280x1024x32, linelength=5120, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90001000000, using 5120k, total 5120k
Console: switching to colour frame buffer device 160x64
fb0: VESA VGA frame buffer device
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: processor limited to max C-state 1
GHES: HEST is not enabled!
00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xfe9ff800
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.4.0-31-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 19, io mem 0xfe9ff400
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.4.0-31-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:12.0: OHCI PCI host controller
ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
ohci-pci 0000:00:12.0: irq 16, io mem 0xfe9fe000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI PCI host controller
usb usb3: Manufacturer: Linux 4.4.0-31-generic ohci_hcd
usb usb3: SerialNumber: 0000:00:12.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
ohci-pci 0000:00:12.1: OHCI PCI host controller
ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4
ohci-pci 0000:00:12.1: irq 16, io mem 0xfe9fd000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI PCI host controller
usb usb4: Manufacturer: Linux 4.4.0-31-generic ohci_hcd
usb usb4: SerialNumber: 0000:00:12.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 3 ports detected
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci-pci 0000:00:13.0: irq 18, io mem 0xfe9fc000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI PCI host controller
usb usb5: Manufacturer: Linux 4.4.0-31-generic ohci_hcd
usb usb5: SerialNumber: 0000:00:13.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 3 ports detected
ohci-pci 0000:00:13.1: OHCI PCI host controller
ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6
ohci-pci 0000:00:13.1: irq 18, io mem 0xfe9f7000
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI PCI host controller
usb usb6: Manufacturer: Linux 4.4.0-31-generic ohci_hcd
usb usb6: SerialNumber: 0000:00:13.1
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 3 ports detected
ohci-pci 0000:00:14.5: OHCI PCI host controller
ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7
ohci-pci 0000:00:14.5: irq 18, io mem 0xfe9f6000
usb 1-4: new high-speed USB device number 2 using ehci-pci
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI PCI host controller
usb usb7: Manufacturer: Linux 4.4.0-31-generic ohci_hcd
usb usb7: SerialNumber: 0000:00:14.5
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
microcode: CPU0: patch_level=0x010000c8
microcode: CPU1: patch_level=0x010000c8
microcode: CPU2: patch_level=0x010000c8
microcode: CPU3: patch_level=0x010000c8
microcode: Microcode Update Driver: v2.01 , Peter Oruba
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: cfb4d0870811f0d88a3f3259915bd8e83759f99c'
zswap: loaded using pool lzo/zbud
Key type trusted registered
usb 2-5: new high-speed USB device number 2 using ehci-pci
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 9:893:960
memory memory11: hash matches
rtc_cmos 00:01: setting system clock to 2017-07-06 00:59:00 UTC (1499302740)
powernow_k8: This CPU is not supported anymore, using acpi-cpufreq instead.
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1480K (ffffffff81f42000 - ffffffff820b4000)
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 1836K (ffff880001835000 - ffff880001a00000)
Freeing unused kernel memory: 156K (ffff880001dd9000 - ffff880001e00000)
random: systemd-udevd urandom read with 7 bits of entropy available
FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
wmi: Mapper loaded
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:02:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000eb8000, d4:3d:7e:9d:62:b0, XID 0c900800 IRQ 25
r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[drm] Initialized drm 1.1.0 20060810
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffd00 irq 22
ata2: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffd80 irq 22
ata3: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffe00 irq 22
ata4: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffe80 irq 22
ata5: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9fff00 irq 22
ata6: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9fff80 irq 22
scsi host6: pata_atiixp
scsi host7: pata_atiixp
ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
usb 1-4: New USB device found, idVendor=2537, idProduct=1068
usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-4: Product: NS1068
usb 1-4: Manufacturer: Norelsys
usb 1-4: SerialNumber: 0123456789ABCDE
usb 2-5: New USB device found, idVendor=1a40, idProduct=0101
usb 2-5: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-5: Product: USB 2.0 Hub
hub 2-5:1.0: USB hub found
hub 2-5:1.0: 4 ports detected
r8169 0000:02:00.0 enp2s0: renamed from eth0
usb-storage 1-4:1.0: USB Mass Storage device detected
scsi host8: usb-storage 1-4:1.0
usbcore: registered new interface driver usb-storage
[drm] radeon kernel modesetting enabled.
usbcore: registered new interface driver uas
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
CRAT table not found
Finished initializing topology ret=0
kfd kfd: Initialized module
checking generic (d0000000 500000) vs hw (d0000000 10000000)
fb: switching to radeondrmfb from VESA VGA
Console: switching to colour dummy device 80x25
[drm] initializing kernel modesetting (RS780 0x1002:0x9616 0x1462:0x7641).
[drm] register mmio base: 0xFEBE0000
[drm] register mmio size: 65536
ATOM BIOS: B43106
radeon 0000:01:05.0: VRAM: 256M 0x00000000C0000000 - 0x00000000CFFFFFFF (256M used)
radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF
[drm] Detected VRAM RAM=256M, BAR=256M
[drm] RAM width 32bits DDR
[TTM] Zone kernel: Available graphics memory: 3956752 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 256M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] Loading RS780 Microcode
[drm] radeon: power management initialized
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] PCIE GART of 512M enabled (table at 0x00000000C0040000).
radeon 0000:01:05.0: WB enabled
radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x00000000a0000c00 and cpu addr 0xffff8802117e1c00
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:01:05.0: radeon: MSI limited to 32-bit
[drm] radeon: irq initialized.
[drm] ring test on 0 succeeded in 1 usecs
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] VGA-1
[drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[drm] Encoders:
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] Connector 1:
[drm] HDMI-A-1
[drm] HPD3
[drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[drm] Encoders:
[drm] DFP3: INTERNAL_KLDSCP_LVTMA
[drm] fb mappable at 0xD0141000
[drm] vram apper at 0xD0000000
[drm] size 5242880
[drm] fb depth is 24
[drm] pitch is 5120
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 160x64
radeon 0000:01:05.0: fb0: radeondrmfb frame buffer device
[drm] Initialized radeon 2.43.0 20080528 for 0000:01:05.0 on minor 0
usb 2-5.1: new low-speed USB device number 3 using ehci-pci
ata2: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
usb 2-5.1: New USB device found, idVendor=093a, idProduct=2510
usb 2-5.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-5.1: Product: USB Optical Mouse
usb 2-5.1: Manufacturer: PixArt
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:13.2/usb2/2-5/2-5.1/2-5.1:1.0/0003:093A:2510.0001/input/input5
hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:13.2-5.1/input0
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: WDC WD3200AAJS-00L7A0, 01.03E01, max UDMA/133
ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA WDC WD3200AAJS-0 3E01 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usb 2-5.2: new low-speed USB device number 4 using ehci-pci
tsc: Refined TSC clocksource calibration: 1500.006 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x159f284877a, max_idle_ns: 440795222870 ns
sda: sda1 sda2 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
usb 2-5.2: New USB device found, idVendor=1c4f, idProduct=0002
usb 2-5.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-5.2: Product: USB Keyboard
usb 2-5.2: Manufacturer: SIGMACHIP
input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:13.2/usb2/2-5/2-5.2/2-5.2:1.0/0003:1C4F:0002.0002/input/input6
hid-generic 0003:1C4F:0002.0002: input,hidraw1: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-0000:00:13.2-5.2/input0
input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:13.2/usb2/2-5/2-5.2/2-5.2:1.1/0003:1C4F:0002.0003/input/input7
hid-generic 0003:1C4F:0002.0003: input,hidraw2: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-0000:00:13.2-5.2/input1
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
clocksource: Switched to clocksource tsc
systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
random: nonblocking pool is initialized
scsi 8:0:0:0: Direct-Access ATA WDC WD3200BPVT-2 1A01 PQ: 0 ANSI: 6
sd 8:0:0:0: Attached scsi generic sg1 type 0
sd 8:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 8:0:0:0: [sdb] Write Protect is off
sd 8:0:0:0: [sdb] Mode Sense: 43 00 00 00
sd 8:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Created slice System Slice.
systemd[1]: Started Trigger resolvconf update for networkd DNS.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Reached target Remote File Systems (Pre).
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Mounting Debug File System...
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Started Braille Device Support.
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Started Read required files in advance.
systemd[1]: Starting Set console keymap...
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Starting Journal Service...
systemd[1]: Created slice User and Session Slice.
systemd[1]: Reached target Slices.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Started Uncomplicated firewall.
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
parport_pc 00:03: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
lp0: using parport0 (interrupt-driven).
systemd[1]: Started Load Kernel Modules.
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Started Apply Kernel Variables.
systemd[1]: Started Journal Service.
sdb: sdb1
sd 8:0:0:0: [sdb] Attached SCSI disk
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
systemd-journald[265]: Received request to flush runtime journal from PID 1
ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B07 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\SOR1) (20150930/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
EDAC MC: Ver: 3.0.0
MCE: In-kernel MCE decoding enabled.
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
snd_hda_codec_realtek hdaudioC0D3: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC0D3: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D3: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D3: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D3: dig-out=0x1e/0x0
snd_hda_codec_realtek hdaudioC0D3: inputs:
snd_hda_codec_realtek hdaudioC0D3: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D3: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D3: Line=0x1a
input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
input: HDA ATI SB Line Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
audit: type=1400 audit(1499302750.269:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=595 comm="apparmor_parser"
audit: type=1400 audit(1499302750.269:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=595 comm="apparmor_parser"
audit: type=1400 audit(1499302750.269:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=595 comm="apparmor_parser"
audit: type=1400 audit(1499302750.269:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=595 comm="apparmor_parser"
audit: type=1400 audit(1499302750.269:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=594 comm="apparmor_parser"
audit: type=1400 audit(1499302750.269:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=594 comm="apparmor_parser"
audit: type=1400 audit(1499302750.273:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/ubuntu-core-launcher" pid=598 comm="apparmor_parser"
audit: type=1400 audit(1499302750.273:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=600 comm="apparmor_parser"
audit: type=1400 audit(1499302750.277:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=602 comm="apparmor_parser"
audit: type=1400 audit(1499302750.289:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=601 comm="apparmor_parser"
Adding 7833596k swap on /dev/sda5. Priority:-1 extents:1 across:7833596k FS
IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
r8169 0000:02:00.0 enp2s0: link down
r8169 0000:02:00.0 enp2s0: link down
IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
r8169 0000:02:00.0 enp2s0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
usb 1-4: USB disconnect, device number 2
perf interrupt took too long (2514 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
usb 2-5: USB disconnect, device number 2
usb 2-5.1: USB disconnect, device number 3
usb 2-5.2: USB disconnect, device number 4
usb 2-5: new high-speed USB device number 5 using ehci-pci
usb 6-2: new full-speed USB device number 2 using ohci-pci
usb 6-2: not running at top speed; connect to a high speed hub
usb 6-2: New USB device found, idVendor=1a40, idProduct=0101
usb 6-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 6-2: Product: USB 2.0 Hub
hub 6-2:1.0: USB hub found
hub 6-2:1.0: 4 ports detected
usb 6-2.1: new low-speed USB device number 3 using ohci-pci
usb 6-2.1: New USB device found, idVendor=093a, idProduct=2510
usb 6-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-2.1: Product: USB Optical Mouse
usb 6-2.1: Manufacturer: PixArt
input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2.1/6-2.1:1.0/0003:093A:2510.0004/input/input13
hid-generic 0003:093A:2510.0004: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:13.1-2.1/input0
usb 6-2.2: new low-speed USB device number 4 using ohci-pci
usb 6-2.2: New USB device found, idVendor=1c4f, idProduct=0002
usb 6-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-2.2: Product: USB Keyboard
usb 6-2.2: Manufacturer: SIGMACHIP
input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2.2/6-2.2:1.0/0003:1C4F:0002.0005/input/input14
hid-generic 0003:1C4F:0002.0005: input,hidraw1: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-0000:00:13.1-2.2/input0
input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2.2/6-2.2:1.1/0003:1C4F:0002.0006/input/input15
hid-generic 0003:1C4F:0002.0006: input,hidraw2: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-0000:00:13.1-2.2/input1
usb 6-2: USB disconnect, device number 2
usb 6-2.1: USB disconnect, device number 3
usb 6-2.2: USB disconnect, device number 4
usb 2-5: new high-speed USB device number 6 using ehci-pci
usb 6-2: new full-speed USB device number 5 using ohci-pci
usb 6-2: not running at top speed; connect to a high speed hub
usb 6-2: New USB device found, idVendor=1a40, idProduct=0101
usb 6-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 6-2: Product: USB 2.0 Hub [Safe]
hub 6-2:1.0: USB hub found
hub 6-2:1.0: 4 ports detected
usb 6-2.1: new low-speed USB device number 6 using ohci-pci
usb 6-2.1: New USB device found, idVendor=093a, idProduct=2510
usb 6-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-2.1: Product: USB Optical Mouse
usb 6-2.1: Manufacturer: PixArt
input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2.1/6-2.1:1.0/0003:093A:2510.0007/input/input16
hid-generic 0003:093A:2510.0007: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:13.1-2.1/input0
usb 6-2.2: new low-speed USB device number 7 using ohci-pci
usb 6-2.2: New USB device found, idVendor=1c4f, idProduct=0002
usb 6-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-2.2: Product: USB Keyboard
usb 6-2.2: Manufacturer: SIGMACHIP
input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2.2/6-2.2:1.0/0003:1C4F:0002.0008/input/input17
hid-generic 0003:1C4F:0002.0008: input,hidraw1: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-0000:00:13.1-2.2/input0
input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2.2/6-2.2:1.1/0003:1C4F:0002.0009/input/input18
hid-generic 0003:1C4F:0002.0009: input,hidraw2: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-0000:00:13.1-2.2/input1
usb 6-2: USB disconnect, device number 5
usb 6-2.1: USB disconnect, device number 6
usb 6-2.2: USB disconnect, device number 7
audit_printk_skb: 33 callbacks suppressed
audit: type=1400 audit(1499419387.767:23): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/bin/ubuntu-core-launcher" pid=25315 comm="apparmor_parser"
audit: type=1400 audit(1499419388.503:24): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=25309 comm="apparmor_parser"
audit: type=1400 audit(1499419388.507:25): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=25309 comm="apparmor_parser"
audit: type=1400 audit(1499419388.507:26): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=25309 comm="apparmor_parser"
audit: type=1400 audit(1499419388.511:27): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=25309 comm="apparmor_parser"
audit: type=1400 audit(1499419388.831:28): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=25316 comm="apparmor_parser"
audit: type=1400 audit(1499419388.847:29): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=25316 comm="apparmor_parser"
audit: type=1400 audit(1499419389.027:30): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cups-browsed" pid=25320 comm="apparmor_parser"
audit: type=1400 audit(1499419389.263:31): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/ippusbxd" pid=25324 comm="apparmor_parser"
audit: type=1400 audit(1499419389.895:32): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/tcpdump" pid=25328 comm="apparmor_parser"
audit_printk_skb: 15 callbacks suppressed
audit: type=1400 audit(1499419395.863:38): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/bin/evince" pid=25312 comm="apparmor_parser"
audit: type=1400 audit(1499419395.887:39): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/bin/evince//sanitized_helper" pid=25312 comm="apparmor_parser"
audit: type=1400 audit(1499419395.887:40): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/bin/evince-previewer" pid=25312 comm="apparmor_parser"
audit: type=1400 audit(1499419395.903:41): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/bin/evince-previewer//sanitized_helper" pid=25312 comm="apparmor_parser"
audit: type=1400 audit(1499419395.903:42): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/bin/evince-thumbnailer" pid=25312 comm="apparmor_parser"
audit: type=1400 audit(1499419395.919:43): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/bin/evince-thumbnailer//sanitized_helper" pid=25312 comm="apparmor_parser"
audit: type=1400 audit(1499419401.787:44): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/tcpdump" pid=25411 comm="apparmor_parser"
SGI XFS with ACLs, security attributes, realtime, no debug enabled
JFS: nTxBlock = 8192, nTxLock = 65536
ntfs: driver 2.1.32 [Flags: R/O MODULE].
QNX4 filesystem 0.2.3 registered.
raid6: sse2x1 gen() 1993 MB/s
raid6: sse2x1 xor() 2081 MB/s
raid6: sse2x2 gen() 3401 MB/s
raid6: sse2x2 xor() 3386 MB/s
raid6: sse2x4 gen() 3914 MB/s
raid6: sse2x4 xor() 1878 MB/s
raid6: using algorithm sse2x4 gen() 3914 MB/s
raid6: .... xor() 1878 MB/s, rmw enabled
raid6: using intx1 recovery algorithm
xor: measuring software checksum speed
prefetch64-sse: 5720.000 MB/sec
generic_sse: 5446.000 MB/sec
xor: using function: prefetch64-sse (5720.000 MB/sec)
Btrfs loaded
usb 6-2: new full-speed USB device number 8 using ohci-pci
usb 6-2: not running at top speed; connect to a high speed hub
usb 6-2: New USB device found, idVendor=1a40, idProduct=0101
usb 6-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 6-2: Product: USB 2.0 Hub
hub 6-2:1.0: USB hub found
hub 6-2:1.0: 4 ports detected
usb 6-2.1: new low-speed USB device number 9 using ohci-pci
usb 6-2.1: New USB device found, idVendor=093a, idProduct=2510
usb 6-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-2.1: Product: USB Optical Mouse
usb 6-2.1: Manufacturer: PixArt
input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2.1/6-2.1:1.0/0003:093A:2510.000A/input/input19
hid-generic 0003:093A:2510.000A: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:13.1-2.1/input0
usb 6-2.2: new low-speed USB device number 10 using ohci-pci
usb 6-2.2: New USB device found, idVendor=1c4f, idProduct=0002
usb 6-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-2.2: Product: USB Keyboard
usb 6-2.2: Manufacturer: SIGMACHIP
input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2.2/6-2.2:1.0/0003:1C4F:0002.000B/input/input20
hid-generic 0003:1C4F:0002.000B: input,hidraw1: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-0000:00:13.1-2.2/input0
input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2.2/6-2.2:1.1/0003:1C4F:0002.000C/input/input21
hid-generic 0003:1C4F:0002.000C: input,hidraw2: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-0000:00:13.1-2.2/input1
usb 6-2: USB disconnect, device number 8
usb 6-2.1: USB disconnect, device number 9
usb 6-2.2: USB disconnect, device number 10
usb 2-5: new high-speed USB device number 9 using ehci-pci
usb 6-2: new full-speed USB device number 11 using ohci-pci
usb 6-2: not running at top speed; connect to a high speed hub
usb 6-2: New USB device found, idVendor=1a40, idProduct=0101
usb 6-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 6-2: Product: USB 2.0 Hub [Safe]
hub 6-2:1.0: USB hub found
hub 6-2:1.0: 4 ports detected
usb 6-2.1: new low-speed USB device number 12 using ohci-pci
usb 6-2.1: New USB device found, idVendor=093a, idProduct=2510
usb 6-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-2.1: Product: USB Optical Mouse
usb 6-2.1: Manufacturer: PixArt
input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2.1/6-2.1:1.0/0003:093A:2510.000D/input/input22
hid-generic 0003:093A:2510.000D: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:13.1-2.1/input0
usb 6-2.2: new low-speed USB device number 13 using ohci-pci
usb 6-2.2: New USB device found, idVendor=1c4f, idProduct=0002
usb 6-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-2.2: Product: USB Keyboard
usb 6-2.2: Manufacturer: SIGMACHIP
input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2.2/6-2.2:1.0/0003:1C4F:0002.000E/input/input23
hid-generic 0003:1C4F:0002.000E: input,hidraw1: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-0000:00:13.1-2.2/input0
input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2.2/6-2.2:1.1/0003:1C4F:0002.000F/input/input24
hid-generic 0003:1C4F:0002.000F: input,hidraw2: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-0000:00:13.1-2.2/input1
conftest[14635]: segfault at 0 ip 00000000004005b0 sp 00007ffeafbb8990 error 4 in conftest[400000+1000]
conftest[14664]: segfault at 0 ip 00007f05d2cb4d26 sp 00007ffc19335928 error 4 in libc-2.23.so[7f05d2c2b000+1c0000]
usb 6-2: USB disconnect, device number 11
usb 6-2.1: USB disconnect, device number 12
usb 6-2.2: USB disconnect, device number 13
usb 6-2: new full-speed USB device number 14 using ohci-pci
usb 6-2: not running at top speed; connect to a high speed hub
usb 6-2: New USB device found, idVendor=1a40, idProduct=0101
usb 6-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 6-2: Product: USB 2.0 Hub
hub 6-2:1.0: USB hub found
hub 6-2:1.0: 4 ports detected
usb 6-2.1: new low-speed USB device number 15 using ohci-pci
usb 6-2.1: New USB device found, idVendor=093a, idProduct=2510
usb 6-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-2.1: Product: USB Optical Mouse
usb 6-2.1: Manufacturer: PixArt
input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2.1/6-2.1:1.0/0003:093A:2510.0010/input/input25
hid-generic 0003:093A:2510.0010: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:13.1-2.1/input0
usb 6-2.2: new low-speed USB device number 16 using ohci-pci
usb 6-2.2: New USB device found, idVendor=1c4f, idProduct=0002
usb 6-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-2.2: Product: USB Keyboard
usb 6-2.2: Manufacturer: SIGMACHIP
input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2.2/6-2.2:1.0/0003:1C4F:0002.0011/input/input26
hid-generic 0003:1C4F:0002.0011: input,hidraw1: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-0000:00:13.1-2.2/input0
input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2.2/6-2.2:1.1/0003:1C4F:0002.0012/input/input27
hid-generic 0003:1C4F:0002.0012: input,hidraw2: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-0000:00:13.1-2.2/input1
usb 6-2: USB disconnect, device number 14
usb 6-2.1: USB disconnect, device number 15
usb 6-2.2: USB disconnect, device number 16
usb 2-5: new high-speed USB device number 12 using ehci-pci
usb 6-2: new full-speed USB device number 17 using ohci-pci
usb 6-2: not running at top speed; connect to a high speed hub
usb 6-2: New USB device found, idVendor=1a40, idProduct=0101
usb 6-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 6-2: Product: USB 2.0 Hub [Safe]
hub 6-2:1.0: USB hub found
hub 6-2:1.0: 4 ports detected
usb 6-2.1: new low-speed USB device number 18 using ohci-pci
usb 6-2.1: New USB device found, idVendor=093a, idProduct=2510
usb 6-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-2.1: Product: USB Optical Mouse
usb 6-2.1: Manufacturer: PixArt
input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2.1/6-2.1:1.0/0003:093A:2510.0013/input/input28
hid-generic 0003:093A:2510.0013: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:13.1-2.1/input0
usb 6-2.2: new low-speed USB device number 19 using ohci-pci
usb 6-2.2: New USB device found, idVendor=1c4f, idProduct=0002
usb 6-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-2.2: Product: USB Keyboard
usb 6-2.2: Manufacturer: SIGMACHIP
input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2.2/6-2.2:1.0/0003:1C4F:0002.0014/input/input29
hid-generic 0003:1C4F:0002.0014: input,hidraw1: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-0000:00:13.1-2.2/input0
input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2.2/6-2.2:1.1/0003:1C4F:0002.0015/input/input30
hid-generic 0003:1C4F:0002.0015: input,hidraw2: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-0000:00:13.1-2.2/input1